Synthstrom Audible håller på att utveckla en ny sequencer/instrument vid namnet Deluge.
Deluge innehåller både sequencer, synth och sampler. Förbeställningar börjar den 25:e oktober men det finns ännu inget pris. Det kommer snart hållas visningar av Deluge vilket bör innebära att det även dyker upp video.
För mer info https://www.facebook.com/synthstromaudible
- Piano-roll-style sequencing on 128 full RGB pads (16×8) with scrolling and zooming.
- Internal synthesizer engine (subtractive and FM).
- Plays samples from SD card (up to 32GB SDHC).
- Sequencing, limited only by available RAM (many thousands of notes).
- Polyphony limited only by CPU. Typically around 48 synth voices or 64 unaffected sample voices may play.
- 64MB of sample ram – work with up to 12 minutes (if mono) of CD-quality samples at once.
- Live adjustment of synth and effect parameters with two endless-turn encoders with LED level-meters. Easy buttons to select the functions these control.
- Advanced syncing capabilities. Weird time signatures supported. Adjustable swing.
- Dedicated volume and tempo knobs.
- LFOs and envelopes on each synth / sample. Highly customizable patching matrix.
- Synthesizer engine features LPF / HPF, arpeggiator, portamento, oscillator sync, ring modulation, unison detune, and more. Four basic waveforms, or select any WAV file from the SD card.
- FX including delay, reverb, chorus, flanger, phaser, bitcrushing, sidechain effect, live stutter, and more.
- Keyboard mode, where the pads become a live instrument on a 2D grid.
- Internal speaker, rechargeable Li-ion battery, and microphone
- Mic and line inputs.
- Two ¼” line outputs, and 3.5mm headphone output.
- 2x CV outputs. 0 – 10V, individually configurable to 1, 1.2, 0.26 or 0.32 volts per octave, or to hertz per volt.
- 4x gate / trigger outputs individually configurable to v-trig or s-trig, with shared voltage switchable between 5V and 12V. Trigger clock output configurable, up to 192 PPQN.
- Trigger clock input, also with adjustable PPQN.
- MIDI input and output via hardware connectors or USB.
- Powered via USB or 9 – 12V centre-negative (pedal-style) power supply (500mA) (not included).
- User-upgradeable firmware
- Dimensions: 305mm x 208mm x 46mm (12 x 8.2 x 1.8 inches).